Supplier Terms and Conditions
SUPPLIER TERMS AND CONDITIONS OF PURCHASE
By accepting a purchase order from Kirin Manufacturing or any of its affiliates, the supplier hereby agrees to all terms and conditions listed below along with any other significant terms and conditions stipulated by the end user, which may change from time to time. Suppliers hereby agree to notify Kirin Manufacturing of nonconforming product or to obtain approval for disposition. Supplier also agrees to retain records for a minimum of seven years.
(a) “Buyer” means B/E Aerospace B.V. and its affiliates, subsidiaries, successors or assigns.
(b) “Supplier” means the person, firm or company to whom this Purchase Order is addressed on the face sheets of this Purchase Order.
(c) “Components” means all goods and services or any parts thereof to be supplied under this Purchase Order. As used herein, the definition of Components shall include services, as the context requires.
(d) “Purchase Order” means the contract arising between Buyer and Supplier for the supply of Components including all instructions, documents, specifications and drawings (if any) referenced therein.
2. ENTIRE AGREEMENT: This Purchase Order and these terms and conditions, when accepted by Supplier’s written acknowledgment or commencement of performance, represent the complete and exclusive agreement between Buyer and Supplier for the Components, superseding all oral or written prior agreements and all other communications between Buyer and Supplier relating to the subject matter of this Purchase Order. No change in, modification of, or revision to this Purchase Order or these terms and conditions shall be valid unless in writing and signed by an authorized representative of Buyer’s Purchasing Department. In the event of any conflict between these terms and conditions and any term or condition on the face sheets of this Purchase Order, the terms and conditions on the face sheets of this Purchase Order shall control.
3. ACCEPTANCE: This Purchase Order and these terms and conditions are Buyer’s offer to Supplier. Any acceptance of this Purchase Order is expressly limited to acceptance of the terms of the Purchase Order and these terms and conditions. Any additional or different terms, which may be contained in any documents furnished by Supplier, are deemed material and Buyer hereby objects to and rejects them. Any of the following Supplier acts shall constitute acceptance (i) acknowledgment of this Purchase Order; (ii) commencement of performance; (iii) informing Buyer of commencement; or (iv) shipping of any Components in performance of this Purchase Order.
4. DELIVERY AND DELAYS: Delivery time is of the essence. Delivery terms shall be as provided on the face sheets of this Purchase Order to Buyer’s address identified on the face sheets of this Purchase Order where title and risk of loss shall pass. If delivery terms are not provided on the face sheets of this Purchase Order, delivery shall be Delivered At Place (DAP Incoterms (2010)) destination to Buyer’s address identified on the face sheets of this Purchase Order where title and risk of loss shall pass. Buyer bases its schedules upon Supplier’s representation that Supplier will deliver the Components to Buyer by the dates specified on the face sheets of this Purchase Order. Time is therefore of the essence and if the Components are not delivered within the time specified hereon, Buyer may reject such Components and cancel this Purchase Order, and have no obligation whatsoever to pay for the Components. Buyer’s acceptance of delinquent deliveries shall not be deemed a waiver by Buyer of its right to cancel this Purchase Order, or to refuse to accept further deliveries. As soon as Supplier determines that a delivery date cannot be met, Supplier shall immediately inform Buyer in writing of the cause for such delay and Supplier’s earliest possible delivery date so that Buyer can determine whether to accept Supplier’s proposed new schedule. Supplier agrees that in the event Components are delinquent to Buyer’s acknowledged Purchase Order, Supplier will grant Buyer first priority for completed Components allocation and shipment. The above remedies afforded to Buyer shall not be exclusive and Supplier shall indemnify and hold Buyer harmless from and against any and all damages, losses, demands, costs and expenses arising from claims of third parties due to any breach or default set forth above.
5. ADVANCE MANUFACTURING, PROCUREMENT OR DELIVERY: Supplier shall not, without Buyer’s prior written consent, manufacture or procure materials in advance of Supplier’s normal lead-time or deliver substantially in advance of schedule. In the event of termination or change, Supplier shall have no claim for any such manufacture or procurement in advance of such normal lead-time unless there has been such prior written consent of Buyer. Components delivered to Buyer substantially in advance of the scheduled delivery date may be returned, at Buyer’s option, to Supplier at Supplier’s expense subject to re-shipment to Buyer at Supplier’s expense in accordance with the schedule hereon prescribed.
6. PACKING: Unless otherwise specified on the face sheets of this Purchase Order (i) Supplier shall package and crate Components in compliance with carriers’ tariffs, (ii) Supplier shall place Components in suitable containers for protection in shipment and storage, (iii) Supplier shall comply with Buyer’s bar code labelling requirements, and (iv) Components pricing shall include all charges for Supplier’s packaging and crating. In the event that Buyer requires special packaging or special containers, Supplier shall separately state the amount of any such special packaging or special containers in its invoice. All packaging must comply with ISPM15 requiring heat treatment or fumigation of all non-manufactured wood packing materials. Supplier is responsible for all costs incurred because of non-compliance.
7. PRICE: This Purchase Order shall be limited to those prices specified on the face sheets of this Purchase Order, which are not subject to increase unless specifically authorized by a written amendment to this Purchase Order. If this Purchase Order omits price terms, the price of the Components shall be the price last quoted or paid, whichever is lower. Unless otherwise provided in this Purchase Order, prices specified on the face sheets of this Purchase Order shall include any and all value added taxes at the prevailing rate, imposts, duties or other governmental charges imposed upon the manufacture, sale or transportation of the Components specified herein. Buyer shall receive the benefit of any general reduction in Supplier’s prices implemented prior to delivery. In no event shall Buyer be charged a price higher than charged to Supplier’s other customers for goods of like grade and quality and in substantially the same quantities.
8. PAYMENT: Payment terms shall be as provided on the face sheets of this Purchase Order. If payment terms are not provided on the face sheets of this Purchase Order, all invoices will be paid by Buyer within ninety (90) days of the later of (i) Buyer’s receipt of Supplier’s correct invoice, which includes among other things, Buyer’s Purchase Order number or (ii) the date of receipt, inspection and acceptance of the Components so ordered.
9. QUALITY ASSURANCE AND INSPECTION:
(a) All Components ordered may be subject to (i) First Article Inspection, Buyer source inspection, or in process inspection during the period of manufacture prior to shipment and (ii) final inspection, testing and acceptance at destination notwithstanding any prior payment or inspection and acceptance. All Components shall comply with all regulatory requirements and quality requirements of BE-PUR-P7.4.3. First Article Inspections shall be carried out in compliance with AS9102 as per BE-PUR-P7.4.3 using Forms BEA-FAI-001 and BEA-FAI-002 which are available on the Buyer Supplier Portal or an acceptable equivalent.
(b) Supplier shall provide and maintain a quality control system acceptable to Buyer and in compliance with those quality control standards (if any) specified on the face sheets of this Purchase Order. Supplier’s quality control system shall be subject to confirmation and acceptance by Buyer and the regulatory agencies.
(c) Buyer maintains the right of access by their organization, their customer, and regulatory authorities to all Supplier’s facilities involved in the Purchase Order and to all applicable records and may require Supplier to flow down to its sub-tier suppliers the applicable requirements in the purchasing documents, including key characteristics where required.
(d) Supplier shall notify Buyer in writing of any desired change to (i) Component manufacturing processes; (ii) the tooling being used in the manufacture of Components; (iii) third party suppliers or outside processes; or (iv) the location of Component manufacturing to another Supplier facility (collectively referred to as “New Processes”), prior to commencing the manufacture of any such changed Component. Supplier may not sell to Buyer any Components manufactured using Supplier’s New Processes until Supplier first obtains instructions from Buyer whether Buyer requires, in its sole discretion, a new first article inspection for the Components affected by such New Processes. Supplier may not deliver any Components manufactured using New Processes without the prior written approval of Buyer.
(e) Supplier shall provide certificates of conformance with Components supplied, plus any other documentation required by Buyer. Supplier shall retain all underlying documentation that forms the basis of such certificates for a period of ten (10) years from the date of issuance of each certificate. Original manufacturer’s certificates of compliance are required for all Components and all raw materials used in the manufacturing of Components. Buyer reserves the right to return Components at Supplier’s expense if Supplier has not provided required documentation within fifteen (15) days of delivery. If Supplier is found to have substituted or supplied incorrect Components or raw material, all costs associated with repair or replacement of such Components shall be paid by Supplier, including, but not limited to, any and all costs associated with the recall of any Buyer product that incorporated such discrepant Components, as required by Buyer.
10. REJECTION OF NONCONFORMING COMPONENTS: In the regular course of its business, Buyer may reject, refuse acceptance, or revoke acceptance of any or all of the Components which are not strictly in conformance with all of the requirements of this Purchase Order and the applicable drawings, designs, and specifications, and by notice, rejection tag, or other communication, notify Supplier of such rejection. At Supplier’s risk and expense and at Buyer’s option, all such Components will be returned to Supplier for immediate (i) repair, replacement, and other correction and redelivery by Supplier as Buyer may direct or (ii) refund by Supplier of the price of any such Components. Buyer may recover from Supplier, all costs and expenses incurred because of or in connection with such non-conformance by equitable price reduction, setoff, or credit against any amount that may be owed to Supplier under this Purchase Order or otherwise. Buyer may charge to Supplier all expense of inspecting, unpacking, examining, re-packing and storing any Components rejected in accordance with the above. Supplier shall not re-tender rejected supplies unless Supplier submits notification of such past rejection is submitted with the re-tender and Buyer has consented to such re-tender.
11. WARRANTY: In addition to all warranties prescribed by law or given by Supplier, Supplier warrants to Buyer and its customers that all Components furnished hereunder will (i) be free from defects in material and workmanship; (ii) conform to the applicable drawings, designs, samples and specifications; (iii) meet all functional performance requirements; (iv) meet all of the requirements of this Purchase Order; and (v) be free from design defects. Unless otherwise specified in the Purchase Order, the Components shall be (i) new and not used or reconditioned; (ii) merchantable and (iii) suitable for the particular purpose or use for which Buyer purchases them. Supplier shall indemnify and hold Buyer harmless from and against any and all damages, losses, demands, costs and expenses arising from claims by third parties due to Supplier’s breach of its warranties hereunder. This warranty shall survive any inspection, delivery, acceptance or payment by Buyer of the Components and are in addition to all other warranties available at law or equity. In addition to any other remedies which may be available at law, Buyer, at its option, may return to Supplier any nonconforming or defective Components, or require timely correction or replacement of the Components, and Supplier shall bear full responsibility for risk of loss or damage and full transportation charges. If Buyer does not require correction or replacement of nonconforming or defective Components, Supplier shall remit such portion of the contract price or such additional amount as is equitable under the circumstances.
12. CHANGES: Buyer may at any time, by written notice, make changes within the general scope of this Purchase Order in any one or more of the following: (i) drawings, designs or specifications; (ii) method of shipping or packing; (iii) place or time of inspection, acceptance or point of delivery; (iv) delivery schedule; (v) quantity of Components ordered; or (vi) order a suspension of Supplier’s work. Should any such change increase or decrease the cost of, or the time required for performance of this Purchase Order, an equitable adjustment may be requested by Supplier or Buyer in the price, delivery schedule, or both. No claim by Supplier for such adjustment will be valid unless submitted to Buyer in writing within thirty (30) days from the date of such change. If Supplier considers that the conduct, statement or direction of any of Buyer’s employees constitutes a change hereunder, Supplier shall notify Buyer’s authorized representative and take no action on the perceived change pending written approval of Buyer’s authorized representative. Only Buyer’s authorized representative has authority to approve a change. Any change made by Supplier without such written approval shall be deemed voluntary by Supplier and not compensable in the cost of or time required for performance. Nothing contained in this clause shall relieve Supplier from proceeding immediately in the performance of this Purchase Order as changed.
13. MATERIALS, TOOLS, EQUIPMENT AND FACILITIES:
(a) Supplier shall furnish all materials, tools and equipment (“Equipment”) required to fulfil this Purchase Order unless otherwise specified in writing. Supplier represents that it now has, or can readily procure without assistance from Buyer, all Equipment and the facilities necessary for the performance of this Purchase Order except as otherwise provided in this Purchase Order.
(b) Any Equipment or facilities furnished to Supplier by or on behalf of Buyer or purchased by Buyer from Supplier (by a separate Purchase Order or as an item under this Purchase Order) for use in connection with the performance by Supplier hereunder and any improvements thereto or replacements thereof shall be held by Supplier as Buyer’s property and shall not be used by Supplier except for the purpose of Supplier’s performance under this Purchase Order. Supplier shall account for all Equipment so furnished to Supplier and/or purchased by Buyer. Buyer does not warrant any aspect of the Equipment. If requested by Buyer, Supplier shall execute a bailment agreement in a format acceptable to Buyer evidencing Buyer’s ownership of the Equipment. Supplier may not deliver custody of any Equipment to any person or entity other than Buyer without Buyer’s prior written permission. Buyer may enter Supplier’s premises at any reasonable time to inspect the Equipment and Supplier’s records with respect thereto.
(c) All of said furnished and/or purchased Equipment and facilities held by Supplier for use by Supplier in connection with performance under this Purchase Order shall be satisfactorily marked, segregated or otherwise clearly identified by Supplier as property of Buyer and/or others (as the circumstances may require). Supplier shall keep such Equipment in good condition and repair and shall be returned by Supplier, at Buyer’s request and at Supplier’s expense, in as good as a condition as when received except for reasonable wear and tear and except to the extent that such Equipment has been incorporated in Components furnished by Supplier pursuant to this Purchase Order or has been properly consumed in the normal performance of work hereunder. Supplier may not deliver custody of any Equipment to any person or entity other than Buyer without Buyer’s prior written permission. Buyer may enter Supplier’s premises at any reasonable time to inspect the Equipment and Supplier’s records with respect thereto.
(d) While in Supplier’s custody and control, all of said furnished and/or purchased Equipment and facilities so held shall be held at Supplier’s risk and Supplier is responsible for paying all personal property taxes that accrue on Equipment in Supplier’s possession. Supplier shall keep such Equipment insured at not less than replacement cost thereof. All such insurance coverage shall provide that payments for loss thereof and damage thereto shall be paid to Buyer. Supplier shall furnish such evidence of insurance as Buyer may require. Supplier shall make no charge for storage, maintenance or retention of Equipment.
14. INDEMNIFICATION AND INSURANCE: Supplier shall indemnify, defend, and hold harmless Buyer and its affiliates, shareholders, officers and employees from and against any and all claims, demands, actions, losses, damages, liabilities, costs, and expenses, including but not limited to attorneys’ fees, arising out of or in connection with (i) the inaccuracy of any representation or warranty by Supplier; (ii) the breach by Supplier of any promises, covenants or conditions made by Supplier to Buyer; or (iii) any Components supplied by Supplier under this Purchase Order. In the event Supplier, its employees, agents, subcontractors, and/or lower tier subcontractors enter premises occupied by or under the control of Buyer or third parties in the performance of this Purchase Order, Supplier shall indemnify, hold harmless and defend Buyer and its affiliates, shareholders, officers and employees from any loss, cost, damage, expense or liability by reason of property damage or personal injury, including Supplier’s employees, of any nature or kind whatsoever arising out of, as a result of, or in connection with such performance occasioned in whole or in part by the actions or omissions of Supplier, its employees, agents, subcontractors, and/or lower tier subcontractors. Without in any way limiting the foregoing undertakings, Supplier and its subcontractors and/or lower tier subcontractors shall maintain insurance, naming Buyer as an additional insured, adequate to cover any products liability, public liability, property damage and automobile liability or any damage incurred in connection with Supplier’s performance of any work on or about Buyer’s premises and shall maintain proper Workmen’s Compensation insurance covering all employees performing this Purchase Order. If requested by Buyer, Supplier will furnish certificates of insurance from its insurance carriers evidencing compliance with the foregoing obligation.
15. DUPLICATION AND USE OF BUYER’S DATA: For this section “Buyer’s Data” means all technical data (including, without limitation, manufacturing, process, test or repair data, know-how, designs, and data describing physical, functional, or performance characteristics), computer software, and all other information and data that (i) has been supplied to Supplier (or any other person) by or on behalf of Buyer, whether transmitted in writing, orally, or otherwise; (ii) Supplier has designed, developed, or created at Buyer’s expense; and (iii) all derivatives of (i) and (ii) that Supplier has designed, developed, or created. Supplier may use Buyer’s Data only in the performance of work for Buyer. Except for articles or designs incorporated in the Components delivered hereunder which originated with Supplier and which may be completely severed from such Components, Supplier shall not, either during the performance of this Purchase Order or thereafter (i) reproduce or manufacture any Components called for hereunder or any part thereof for any third parties utilizing Buyer’s Data except in the performance of Purchase Orders for Buyer or (ii) disclose any Buyer’s Data without first obtaining Buyer’s written consent. Upon Buyer’s request, Supplier shall return all Buyer’s Data and any copies thereof to Buyer. If with Buyer’s written consent, Buyer’s Data is furnished to Supplier’s suppliers or subcontractors for use in the performance of this Purchase Order, Supplier shall (i) insert the substance of this provision in its orders with its suppliers and subcontractors and (ii) remain responsible hereunder for any breach by such supplier or subcontractor.
16. SUPPLIER’S DISCLOSURES. All unpatented ideas, information, design devices, prints, drawings, and technical information concerning Supplier’s products, methods or manufacturing processes which Supplier discloses or furnishes to Buyer in connection with this Purchase Order shall be, except only to the extent as may be otherwise specifically agreed to in a nondisclosure agreement signed by the authorized representatives of Buyer and Supplier, deemed to have been disclosed or furnished as part of the consideration for this Purchase Order and Supplier agrees not to assert any claims by reason of the use, duplication or disclosure thereof by Buyer and or its successors, assigns or customers. Buyer and its successors and assigns may subject all Components ordered herein to further manufacture, combine them with other articles, sell or put them to any use whatsoever, and Supplier may make no claim for royalties or additional compensation due to such manufacture, combination, sale or use.
17. EXPORT CONTROL. Supplier shall comply with all applicable import and export control laws and regulations, including, but not limited to, the requirements of the United States Arms Export Control Act, 22 USC 2751-2794, the United States International Traffic in Arms Regulations (“ITAR”) (22 CFR Parts 120 – 130) and the United States Export Administration Act, 50 USC app 2401-2420 (as amended), and all requirements to obtain any and all export licenses, approvals and agreements. Where Supplier holds the design authority for a Component, Supplier shall provide Buyer with export classification data, such as Export Control Classification Number (“ECCN”), Harmonized Tariff Schedule (“HTS”) code or ITAR classification, as applicable.
18. ASSIGNMENT: No assignment of this Purchase Order, or any duty or right under it, shall be binding upon Buyer unless Supplier first obtains Buyer’s written consent to such assignment. Any attempt to assign or delegate in violation of this section shall be void.
19. SUBCONTRACTING: Without the prior written consent of Buyer, Supplier shall not subcontract for procurement of all or any number of the Components covered by this Purchase Order in completed or substantially completed form. Supplier will be responsible for the performance of its subcontractors and suppliers and any breach or default of any provision of this Purchase Order by any of them shall be deemed a breach or default by Supplier.
(a) Termination for Convenience. Buyer may terminate, for its convenience, this Purchase Order, in whole or in part, by providing written notice to Supplier. Upon receipt of such notice, Supplier shall (i) discontinue all work with respect to that portion of this Purchase Order terminated by Buyer; (ii) place no additional orders or subcontracts for materials or services as to that part of the work terminated; and (iii) take such other reasonable action as may reduce any termination costs due Supplier. In the event Buyer terminates for convenience any Purchase Order, in whole or in part, Supplier’s claim shall be limited to (i) an amount equal to the aggregate purchase price of all Components completed prior to the termination within the established lead-times set by Buyer’s delivery schedule, and (ii) Supplier’s raw materials, work in process, supplies and other material costs (excluding overhead and profit) incurred in the production of any uncompleted Components scheduled for delivery within the established lead-times; provided that such costs under (i) and (ii) cannot be allocated by Supplier to other work. In no event shall termination costs exceed the total purchase price of the Components terminated by Buyer.
(b) Termination for Default. Buyer, by written notice, may terminate this Purchase Order for default if Supplier fails to (i) comply with any of the terms of this Purchase Order or these terms and conditions; (ii) make progress so as to endanger performance of this Purchase Order; or (iii) provide Buyer, upon request, with adequate assurance of future performance within the time period requested by Buyer. Supplier shall have thirty (30) days to remedy such failure to the reasonable satisfaction of Buyer following notice from Buyer.
(c) Termination for Insolvency. Buyer may terminate this Purchase Order immediately upon written notice to Supplier if Supplier (i) becomes insolvent; (ii) files a voluntary petition in bankruptcy; (iii) executes an assignment for the benefit of creditors; (iv) is adjudicated as bankrupt or insolvent or a receiver or trustee is appointed for Supplier; or (v) Supplier terminates its existence or ceases to do business.
(d) Remedies Upon Termination for Default or Insolvency. Any termination for default or insolvency shall be without liability to Buyer except for completed Components delivered and accepted by Buyer prior to such termination. Unless otherwise agreed to in writing by Buyer, any termination of this Purchase Order for Default or Insolvency shall operate as a cancellation of the entire undelivered portions of this Purchase Order, and Buyer shall retain all remedies at law or in equity arising out of the cancellation. Supplier will be liable for damages caused by or resulting from its default including but not limited to excess costs of re-procurement.
21. PATENTS AND PATENT INDEMNITY: Except when the work hereunder or supplies are manufactured to detailed designs, originated and furnished by Buyer or by a process or method the use of which is specifically directed by Buyer, Supplier guarantees that the goods produced hereunder and the sale, importation or use of them will not infringe any patents and Supplier shall indemnify and save Buyer and its customers harmless from, any expense, loss, cost, damage or liability which may be incurred on account of infringement or alleged infringement of patent rights with respect to such Components and defend, at its own expense, any action or claim in which such infringement is alleged, provided Supplier is notified of such actions or claims against Buyer. In the event of an injunction or restraining order, Supplier shall, at its own expense, either procure for Buyer the right to continue to sell, import and use the Component, or replace or modify the Component so that it becomes non-infringing.
22. STATUS AS INDEPENDENT CONTRACTOR: Supplier is an independent contractor and while performing work on or off Buyer’s premises, neither it nor any of its agents or employees shall be considered agents or employees of Buyer.
23. LABOR DISPUTE: Whenever any actual or potential labour dispute delays or threatens to delay the timely performance of this Purchase Order, Supplier shall immediately give written notice thereof to Buyer. Supplier shall insert the substance of this provision in its orders with its suppliers.
24. NON-WAIVER AND REMEDIES: Any and all failure, delay or forbearance of Buyer insisting upon or enforcing at any time or times, any of the provisions of this Purchase Order, or to exercise any rights or remedies under this Purchase Order shall not be construed as a waiver or relinquishment of any such provisions, rights or remedies in those or any other instances, rather the same shall be and remain in full force and effect. The remedies herein reserved unto Buyer shall be cumulative and additional to any other remedies in law and equity.
25. GOVERNING LAW: This Purchase Order and the contract between the parties evidenced hereby shall be construed and interpreted solely in accordance with the laws of Singapore disregarding any conflict of law provisions that may require the application of the law of another jurisdiction. The United Nations Convention on Contracts for the International Sale of Goods, 1980, and any successor thereto, shall not apply. Venue and jurisdiction for all legal proceedings of any kind or nature brought to enforce any provisions of these terms and conditions or the Purchase Order shall be brought exclusively before the courts of Makati City, Metro Manila, Philippines. Pending any prosecution, appeal, or final decision of any dispute, or the settlement of any dispute arising under the Purchase Order or these terms and conditions, Supplier shall proceed diligently, as directed by Buyer, with performance of the Purchase Order. In no event shall Supplier commence any action arising out of the Purchase Order or the contract between the parties later than one year after the cause of action has accrued.
26. WAIVER OF LIENS: Supplier hereby waives and relinquishes all liens or claims, statutory or otherwise, which Supplier now has or may hereinafter have as a result of labour performed and materials furnished by Supplier to Buyer in performance of this Purchase Order.
27. PUBLICITY: Supplier shall not use the name of Buyer in any advertising or publicity, nor make any news release, public announcement, denial, or confirmation of this Purchase Order or any part or any phase thereof, without the prior written approval of Buyer.
28. COMPLIANCE WITH LAW: Supplier warrants that the performance of any work pursuant to this Purchase Order is and shall, in all respects be in strict compliance with all laws, rules, regulations, ordinances, proclamations, demands, directives, or other legal requirements that now govern or may hereafter govern the manufacture, sale or delivery of the Components contemplated by this Purchase Order including but not limited to any applicable laws relating to basic working conditions and human rights, slavery or human trafficking. Supplier’s violation of any applicable laws relating to basic working conditions and human rights, including laws regarding slavery and human trafficking, applicable to Supplier’s performance of work pursuant to this Purchase Order, shall be deemed a material breach of this Purchase Order giving Buyer the right to cancel any undelivered portions of this Purchase Orders for cause and Buyer may also exercise any other rights it may have at law, equity or under these terms and conditions for Supplier’s breach. Supplier agrees upon request to furnish Buyer with a certificate of compliance relating to any such laws and regulations in such form as Buyer may require. Supplier agrees to indemnify and hold Buyer harmless from any liability arising from any failure of Supplier to comply with such laws and regulations. Supplier agrees to obtain all necessary permits and licenses at its expense.
29. REGULATORY REQUIREMENTS:
(a) Supplier warrants that, except as agreed in writing by Buyer, none of the chemical substances constituting or contained in the Components sold or otherwise transferred to Buyer under this Purchase Order are “Hazardous Substances” as defined in the United States Comprehensive Environmental Response, Compensation And Liability Act (“CERCLA”) or substances on the “Candidate List” or “List for Authorization” greater than 0.1% by weight as defined by the European Chemicals Agency (“ECHA”), as such may be modified from time to time. Supplier acknowledges and agrees that the “Hazardous Substances” and substances on the “Candidate List” or “List for Authorization” requirements are evolving and Supplier shall use its best efforts to meet such future requirements. Supplier shall deliver Components to Buyer that do not contain any substances banned under such applicable laws, rules or regulations and Supplier agrees to indemnify and hold Buyer harmless from any and all claims, demands, actions, losses, damages, liabilities, costs, and expenses arising from any failure of the Components from complying with such laws, rules and regulations. Failure to comply with the requirements of this section shall be a material breach and grounds for default.
(b) In addition to the above requirements, Supplier shall specifically comply with all applicable requirements of European Regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorization, and Restriction of Chemicals (“REACH”). In regard to such REACH regulations, Supplier shall fully cooperate with Buyer to fulfill all obligations under the applicable REACH obligations including: (i) Supplier shall deliver Components to Buyer that do not contain any substances banned under such REACH regulations and as such Supplier shall notify Buyer of any REACH substances of very high concern (“SVHC”) exceeding 0.1% by weight of the individual Component being supplied by Supplier; (ii) Supplier shall submit to Buyer duly completed Material Declaration Forms; (iii) Upon request, Supplier shall provide any and all information showing that Supplier has fulfilled its obligations under REACH; and (iv) Supplier shall comply with the obligations stipulated in REACH related to the identification and/or notification of substances appearing on the Candidate List, or the List for Authorization to the ECHA.
(c) The packaging, labeling and shipping of all hazardous substances must conform with all applicable laws and regulations. In addition to the application of proper shipping labels on the outside container, each container of hazardous substances shall be marked with the appropriate precautionary label in accordance with all applicable laws, rules and regulations relating to hazardous substances. Supplier shall supply Buyer with any and all required material safety data sheets (“MSDS”) when requested by Buyer.
(d) Supplier’s compliance with conflict minerals regulations is a material obligation of this Purchase Order. Conflict minerals requirements are defined in Section 1502 of the Dodd–Frank Wall Street Reform and Consumer Protection Act and the SEC rules implementing Section 1502. Supplier shall disclose to Buyer whether any tungsten, tin, tantalum and gold are contained in the Components prior to delivering such Components to Buyer. Furthermore, Supplier represents and warrants that it has adopted policies and established systems to procure tungsten, tin, tantalum and gold only from sources that have been verified as conflict free, and agrees to provide supporting data on Supplier’s supply chain for tungsten, tin, tantalum and gold to Buyer upon request.
(e) If Supplier delivers Components to Buyer that are shipped directly to Buyer where Buyer is the importer of record into the United States and its insular possessions, Supplier agrees to, upon request, complete Buyer’s Customs-Trade Partnership Against Terrorism (“C-TPAT”) Security Self Assessment Questionnaire.
(f) If this Purchase Order is for a contract or subcontract with the U.S. government, then the following applies: “The Equal Employment Opportunity clauses in Section 202 of Executive Order 11246, Section 503 of the Rehabilitation Act of 1973, and Section 4212 of the Vietnam Era Veterans Readjustment Assistance Act of 1974, as amended, 29 CFR Part 471, Appendix A to Subpart A (EO13496), and the implementing rules and regulations of the Office of Federal Contract Compliance Programs (41 CFR, Chapter 60) are incorporated herein. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-300.5(a) and 41 CFR 60-741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of protected veteran status or disability, and requires affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified protected veterans and individuals with disabilities, and to treat qualified individuals without discrimination on the basis of their physical or mental disability.”
30. SEVERABILITY: If any of the terms and conditions of purchase herein or this Purchase Order are at any time held to be invalid or unenforceable, such term or condition shall be construed as severable and shall not in any way render invalid or unenforceable the remainder of the terms and conditions which shall remain in full force and effect and, in lieu of the invalid or unenforceable provision, there will be added as part of these terms and conditions of purchase or this Purchase Order one or more provisions as similar in terms as may be valid and enforceable under applicable law.
31. SURVIVAL: All rights, duties and obligations which by their nature should apply beyond the term of this Purchase Order will remain in force after Supplier’s completion of this Purchase Order or any termination of performance of this Purchase Order.
additional terms can be found at http://www.meggitt.com/commercial/ and are incorporate herein by reference
additional Supplier Quality Qualifications can be found at https://dev.kirinmfg.com/wp-content/uploads/2019/02/Flowdown-Requirements-for-Kirin-Manufacturing-REV1.pdf and are incorporated herein by reference